Napoleon Built-In 700 Series 32-inch stainless steel griddle with lid

Colors / Finishes

Napoleon Built-In 700 Series 32-Inch Griddle

Napoleon

Napoleon's Built-In 700 Series 32-inch griddle — two U-shaped stainless steel burners, 24,000 BTU, dual-zone cooking on a 5 mm 430 stainless steel surface, removable lid, one-touch ignition and SafetyGlow PLUS flame-sensing knobs.

Pricing:Request a Quote

Availability varies by supplier and season.

About This Product

The Napoleon Built-In 700 Series 32-inch Griddle transforms outdoor cooking in a custom outdoor kitchen. Made from premium 304 stainless steel, it features a robust 430 stainless steel cooking surface and a convenient removable lid that covers the cooking surface or removes entirely to suit your setup. Two high-performance U-shaped stainless steel burners deliver 24,000 BTU across a 29.5 in. x 17 in. cooking surface (500 sq in total — up to 28 burgers), and the dual-zone control system with an integrated baffle creates two distinct temperature zones for preparing multiple dishes simultaneously. Starts are effortless with the one-touch integrated ignition system, and the SafetyGlow PLUS control knobs glow red when the gas is on and blink red if the flame goes out, for added safety. Cleanup is simple with front-access grease management — an easy-to-remove front grease tray and an integrated scraping tool. The griddle installs into an industry-standard 32 in. footprint with a 30-32 in. wide x 19.4-19.75 in. deep cut-out, and the cabinet must be non-combustible unless the corresponding Napoleon Zero Clearance Liner (BI-3623-ZCL, sold separately, optional) is installed. Electrical power from a GFI-protected outlet is required for the ignition, knob lighting and flame-sensor electronics; the power cord connects to the electrical box on the back of the appliance. If installed under overhead combustible construction, the appliance must be used only in conjunction with a suitable UL 710 or ULC S646-approved heavy duty vent hood. Natural gas models operate at 7 in. water column and propane models at 11 in. water column. Backed by Napoleon's Limited Lifetime Warranty.

Specifications

Manufacturer documentation controls final installation.

Manufacturer

Napoleon

Burners

2 stainless steel U-shaped burners with integrated baffle (dual-zone control)

Total Btu

24,000 BTU

Main Cooking Area

29.5 x 17 in (75 x 43 cm) per the official specifications table (the page feature copy lists 29.5 x 18 in); 500 sq in total cooking area

Total Cooking Area

500 sq in (3,225 cm2); up to 28 hamburgers

Cooking Surface Material

5 mm thick 430 stainless steel cooking surface in a 304 stainless steel body

Lid

Detachable/removable lid - cover the cooking surface or remove it entirely

Ignition

Instant one-touch integrated ignition

Control Knob Lighting

SafetyGlow PLUS backlit knobs - glow red when gas is on, blink red if the flame goes out (flame sensor)

Grease Management

Removable front grease tray with integrated scraping tool (front-access)

Included Electrical

Power cord and transformer; plugs into GFI-protected outlet (electrical box on back of appliance, transformer to power box); transformer output 12VAC

Required Separately Sold

Napoleon Zero Clearance Liner BI-3623-ZCL (optional; required when cabinet/countertop construction is combustible); UL 710 / ULC S646 heavy duty vent hood required if installed under overhead combustible construction

Warranty

Napoleon Limited Lifetime Warranty - lifetime on hood, stainless steel lid, porcelain enamel lid, aluminum castings, stainless steel cooking grids and stainless steel tube burners; 15 years stainless steel sear plates; 3 years electrical components; 15 years all other parts. See napoleon.com warranty page and product manual for conditions.

Configuration

Built-in griddle for custom outdoor kitchen installation; industry-standard 32 in. footprint

Installation & Technical Documents

Official manufacturer documentation, each button opens the document in a new tab.

Installation & Owner's Manual Specification Sheet

Product specifications are provided for planning purposes. Final dimensions, clearances, utility requirements, and installation methods must be verified against current manufacturer documentation before ordering, fabrication, or installation.